Introduction to Titanium Forging Series Products
Titanium forgings are workpieces or blanks produced by applying high pressure to titanium and Titanium Alloy Billets, inducing plastic deformation in the solid state to achieve the desired shape, dimensions, and exceptional comprehensive properties. Forging processes (primarily die forging and free forging) effectively refine the grain structure of titanium materials, optimize the alignment of metal fiber flow with the workpiece geometry, and significantly enhance the material's specific strength, corrosion resistance, high-temperature endurance, and fatigue life. As the core choice for high-end structural components, titanium forgings achieve the ultimate balance between lightweight and high strength, making them the preferred material for extreme operating conditions. Titanium forgings provide the ideal solution when your project demands stringent requirements in the following areas:
- Simultaneous need for lightweight and high strength
- Adaptability to extreme environments (corrosion, high temperature, high pressure)
- Long-term service reliability and stability
- Fatigue resistance and impact resistance
- Biocompatibility (for medical applications)
When selecting products, please communicate with us to clarify the following parameters:
- Material grade (selected based on strength, corrosion resistance, operating temperature, and application)
- Heat treatment condition / grade (directly determines final mechanical properties)
- Precise dimensions and tolerance range
- Non-destructive testing requirements (e.g., ultrasonic testing, penetrant testing grades)
- Specialized application adaptation needs (e.g., medical, aerospace-specific standards)
▶ Titanium Forged Ring
Alloy: GR5 (Ti-6Al-4V)-T6
Dimensions: Φ2000 mm × Φ1500 mm × 200 mm
Mechanical Properties: Tensile Strength ≥860 MPa, Yield Strength ≥795 MPa, Elongation ≥10%
Standard: ASTM B381-2017
Applications: Aeroengine casings, offshore equipment housings
Alloy: GR2-T4
Dimensions: Φ1800 (-0, +5) mm × Φ1300 (-5, +0) mm × 150 (-0, +5) mm
Standard: GB/T 2965-2007
Applications: Chemical reactor flanges, nuclear power equipment connectors
▶ Thick-walled Titanium Forged Ring
Alloy: GR7(Ti-Pd)-T6
Dimensions: Φ1600 mm × Φ1000 mm × 120 mm
Mechanical Properties: Tensile Strength ≥ 620 MPa, Yield Strength ≥ 485 MPa, Elongation ≥ 12%
Standard: ASTM B381-2017
Application: High-acid reaction equipment, corrosion-resistant pipeline flanges
Alloy: GR5 (Ti-6Al-4V)-T6
Dimensions: Φ500 mm × 3000 mm
Standard: GB/T 2965-2007
Applications: Aerospace structural components, medical device prosthesis blanks
Alloy: GR1-T4
Dimensions: Φ300 mm × 2500 mm
Standard: ASTM B348-2019
Applications: Chemical equipment shaft components, marine engineering connecting rods
▶ Custom-Shaped Titanium Forgings
Alloy: GR5 (Ti-6Al-4V)-T6
Specifications: Customized irregular structures (machined per customer drawings)
Mechanical Properties: Tensile strength ≥860 MPa, Yield strength ≥795 MPa, Elongation ≥8%
Standard: AMS 4928
Applications: Aerospace irregular brackets, core components for high-end equipment
Alloy: GR5 (Ti-6Al-4V)-T6
Specifications: Φ600 mm × Φ500 mm × 2000 mm
Standard: ASTM B338-2020
Applications: Aerospace hydraulic system piping, deep-sea exploration equipment conduits
Alloy: GR9 (Ti-3al-2.5v)-T6
Dimensions: Φ400 mm × Φ320 mm × 1800 mm
Standard: GB/T 3624-2010
Applications: Medical device delivery piping, high-temperature fluid piping
▶ Titanium Forged Pipe (for High-Pressure Vessels)
Alloy: GR5 (Ti-6Al-4V)-T6
Specifications: Φ500 mm × Φ450 (-0.5, +2.5) mm × 1000 mm
Standard: ASTM B338-2020
Straightness: ≤0.8 mm/m
Applications: High-pressure gas storage vessels, aerospace hydraulic reservoirs
▶ T-Shaped Titanium Forged Tubes
Alloy: GR5 (Ti-6Al-4V)-T6
Specifications: Φ800 mm × Φ650 mm × 2500 mm
Standard: AMS 4928
Applications: Aeroengine piping joints, offshore engineering fluid distribution pipelines
▶ Titanium Forgings (Medical Grade)
Alloy: GR5 (Ti-6Al-4V)-ELI-T6
Specifications: Custom machined per prosthesis design
Mechanical Properties: Tensile Strength ≥860 MPa, Yield Strength ≥795 MPa, Elongation ≥12%
Standard: ASTM F136-2021
Applications: Artificial joint prostheses, orthopedic implants
Contact US
Website: www.titaniumprox.com/
Email: info@titaniumprox.com
Address: Taicheng Road, High-Tech Industrial Development Zone, Baoji City, Shaanxi Province, China